Cambium Networks ePMP Bridge-in-a-Box
Plug-n-Play Outdoor Wireless Ethernet Bridge
Cambium Networks Products
ePMP Bridge-in-a-Box
Click here to jump to more pricing!
Please Note: All Prices are Inclusive of GST
Overview:
ePMP Bridge-in-a-Box is a pre-paired Point-to-Point (PTP) link comprised of two ePMP Force 180 devices designed to extend networks between two locations (up to 10 miles apart).
The Bridge-in-a-Box solution may be quickly installed to:
- Extend a local network to a remote building
- Extend your Wi-Fi link to a new location
- Provide a cost-effective solution to backhauling CCTV networks
- Support any application requiring network extension!
Line of Sight Range
Expected performance based on Line of Sight (LOS) between the two units. Trees, buildings, and other obstructions will result in lower range and performance.
Features:
ePMP Bridge-in-a-Box Features
- Frequency: 4910-5970 MHz
- Throughput: up to 200 MBps
- Flexible Channel Width: 5, 10, 20, 40 MHz channels
- Security: AES128 data encryption and RADIUS-based authentication
Plug-n-Play Outdoor Wireless Ethernet Bridge
- Extend a local network to a remote building
- Extend your Wi-Fi link to a new location
- Provide a cost-effective solution to backhauling CCTV networks
- Support any application requiring network extension
Specifications:
| Bridge-in-a-Box Specifications | |
|---|---|
| Wireless Standard | ePTP proprietary protocol. Supports longer ranges, lower latency, and greater performance. Optional Standard Wi-Fi mode of operation available. |
| Wired Interface | Gigabit / Fast Ethernet |
| Functions | Traffic prioritization using ePMP QoS (Quality of Service), WEP security. |
| Power | 24-56V PoE at device |
| Radio Transmit Power | Up to 30 dBm |
| Environmental | Outdoor IP55 -4 to 131 deg F (-20 to +55 deg C) |
| Antenna | 16 dBi integrated antenna |
| Mounting | Flexible pole mount. Supports diameters from 1-3 inches (2.5 - 7.5 cm) |
| Security | AES128 data encryption and RADIUS-based authentication |
| Spectrum | |
| Frequency Range | 4910 - 5970 MHz |
| Channel Spacing | Configurable on 5 MHz increments |
| Frequency Range | 5 GHz: 4910 - 5970 MHz (exact frequencies as allowed by local regulations) |
| Channel Width | 5 | 10 | 20 | 40 MHz |
| Physical Layer | 2x2 MIMO/OFDM |
| Ethernet Interface | 10/100/1000BaseT, Compatible with Cambium PoE pinouts (V+ = 7 & 8, Return = 4 & 5) and Standard PoE pinouts (V+ = 4 & 5, Return = 7 & 8) |
| Protocols Used | IPv4, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping |
| Network Management | HTTPs, SNMPv2c, SSH |
| VLAN | 802.1Q with 802.1p priority |
| Performance | |
| ARQ | Yes |
| Nominal Receive Sensitivity (w/FEC) @20MHz Channel | MCS0 = -93 dBm to MCS15 = -72 dBm (per branch) |
| Nominal Receive Sensitivity (w/FEC) @40MHz Channel | MCS0 = -90 dBm to MCS15 = -69 dBm (per branch) |
| Quality of Service | Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority |
| Physical | |
| Transmit Power Range | -17 to +30 dBm (combined, to regional EIRP limit) (1 dB interval) |
| Surge Suppression | 2 Joule Integrated |
| Weight | 0.50 kg (1.1 lb.) (includes mounting bracket) |
| Wind Survival | 145 km/hour (90 mi/hour) with antenna |
| Dimensions (H x W x D) | 12.4 x 25.1 x 11.9 cm (4.9 x 9.9 x 4.7 in) - with mounting bracket attached |
| Pole Diameter Range | 1 - 1.6 in (2.5 - 4.1 cm) with included clamp ; up to 2.25 in (5.7 cm) with larger clamp |
| Power Consumption | 10 W Maximum, 5 W Typical |
| Input Voltage | 10 to 30 V |
Views:
Documentation:
Download the Cambium Networks ePMP Bridge-in-a-Box Datasheet (.PDF)
Pricing Notes:
- All Prices are Inclusive of GST
- Pricing and product availability subject to change without notice.
Cambium Networks Products
ePMP Bridge-in-a-Box